03 - USB code upload

Uploading is done with Visual Studio Code (VS) using the PlatformIO tab

image-1648136519736.png

During your 1st Upload, you must connect your TTGO or ESP32 to your PC with a USB cable

Thanks to VS you will load in the microcontroller the firmware and the HTML pages of the router

There are 2 uploads to do:

image-1654844236864.png

Then you can directly upload the code remotely with the /update page of the router


Revision #3
Created 2022-03-24 17:10:13 UTC by Cyril
Updated 2022-06-11 15:20:35 UTC by Cyril