02 - Copy or update repository sources

The sources are available on the Github (a code repository web server)

once your Visual Studio is launched, go to your Terminal and type

git clone https://github.com/xlyric/PV-discharge-Dimmer-AC-Dimmer-KIT-Robotdyn.git

it will then clone the repository on your machine and you can adapt the code to your needs and upload it.

PS C:\Users\c_lyr\Documents\PlatformIO\Projects\1> git clone https://github.com/xlyric/PV-discharge-Dimmer-AC-Dimmer-KIT-Robotdyn.gitCloning into 'PV-discharge-Dimmer-AC-Dimmer-KIT-Robotdyn'...remote: Enumerating objects: 179, done.remote: Counting objects: 100% (179/179), done.remote: Compressing objects: 100% (136/136), done.Recote: Total 179 (delta 90), reused 119 (delta 38), pack-reused 0 eceiving objects:  75% (135/179)Receiving objects: 100% (179/179), 630.36 KiB | 2.58 MiB/s, done.Resolving deltas: 100% (90/90), done.

you can then go to the directory created during the command

Resolving deltas: 100% (90/90), done.PS C:\Users\c_lyr\Documents\PlatformIO\Projects\1> ls Directory: C:\Users\c_lyr\Documents\PlatformIO\Projects\1Mode LastWriteTime Length Name---- ------------- ------ ----d---- 10/03/2022 16:53 pv-router-esp32

In the case of an update, you can update your code again with the following command

git pull

Default configuration

There is nothing more to configure in the dimmer,you just have to upload the corresponding version to the dimmer.

Wifi configuration is done in Wifi autoconnect.He creates a WiFi "dimmer" with a web interface accessible at 192.168.4.1 which allows you to configure your personal WiFi.